INJORA Purple Viper 1721 Brushless Motor For 1/18 TRX4M Ascent18 1721 MOTOR & MBL32 ESC #530159

数量

已售出: 0

简介

+
INJORA Brushless Micro MBL32 ESC & 1721 Purple Viper Motor for 1/18 TRX4M Note: The motor is only compatible with: 1/18 TRX4M, 1/18 Redcat Ascent18 Not compatible with 370 gearbox! The ESC is compatible with most of the receiver and remote combinations that with CH2 Never plug the battery upside down, otherwise the ESC will immediately burn out! Please program the ESC according to the motor specifications! Programming Tutorial Instruction Manuals If your transmitter does not control the car well, please try these: If you are using a 2S battery, please set the BEC output to 6.0V using the DIP switches. Different settings are required for 2S and 3S batteries! Before powering on, set the transmitter's throttle trim to 0% at neutral. Increase the distance between the transmitter and the car to avoid signal interference. For optimal performance, we recommend using a 3S Lipo battery. Features: INJORA MBL32 ESC based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable. The MBL32 ESC features a built-in BEC with adjustable output: 6V/7.4V Smooth and linear at low speeds, powerful and aggressive at high speeds. Runs more quietly than brushed systems, producing virtually no noise. 1721 Purple Viper outrunner motor, equipped with a mounting plate to mount the motor on the TRX4M transmission. Plug-and-Play Convenience: Includes multiple adapter cables for different battery connectors. ESC Specifications: Part Number: MBL32 (MBL: Micro Brushless) Max.Current: 30A LiPo Cells: 2-3s Compatible Motors: INJORA 1721/2204 Applications: 1/18 1/24 RC Crawlers BEC: Max 3A BEC Output: 6.0v/7.4V (adjustable by DIP switch) Motor Connectors: PH2.0 3Pin Dimensions(L*W*H): 30*22*11mm Weight: 16g Waterproof: No Motor Specifications: Model Number: 1721 Motor Type: Sensorless Brushless Outrunner RPM/Volt: 2800KV Motor Poles: 14 Sine Mode Power: 7 No-Load Current (11.1V): 0.7A Max Peak Current: 30A Motor Connectors: PH2.0 3Pin Dimensions: Φ16.7*20.9mm Motor Qutput Shaft Diameter: Φ2mm Motor Pinion: 0.4mod 11T Weight: 19g Waterproof: Yes

你可能感兴趣的商品