田宮 58726 1/10 RC遙控車 XV-02RS PRO 底盤套件
【On-Road Oriented Rally Chassis!】
This 4WD touring chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via identical length front and rear propeller shafts, and is ideally setup for on-road running. 39T differential gears front and rear, and one setup option 40T differential gear are included, facilitating changes to drive balance. It features optimum balance and a slim chassis with carbon fiber-reinforced rigid lower deck. The 4-wheel independent double wishbone suspension has dedicated aluminum-cylinder oil dampers.
【Featured Components】
Drivetrain: Full ball bearings, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (2x 39T and 1x 40T gears included), front and rear universal drive shafts
Suspension: Front and rear aluminum oil dampers (blue caps, touring car size), 6-degree caster blocks, turnbuckle upper arms, 3.5mm thickness carbon damper stays
Chassis: Carbon fiber-reinforced lower deck, aluminum servo mount, angled front bumper, hi-torque servo saver
The chassis employs an aluminum servo mount and hi-torque servo saver. Turnbuckle rods allow swift steering adjustment.
The double wishbone front suspension features 6-degree caster blocks.
High performance aluminum cylinder dampers are touring car size, with 30.5mm piston rods. The damper stay is 3.5mm thickness carbon fiber.
Identical length propeller shafts transmit power from the central spur gear to the front and rear.
Sealed front and rear gearboxes house oil filled gear differentials.
Upper arm attachment in the double wishbone rear suspension can be altered by the use of spacers from separately sold Item 53539.
Rear aluminum cylinder oil dampers are also touring car size.
The battery pack sits on its side, allowing a narrower chassis. Access it by opening the levers front and rear, as shown here.
Take a closer look at the carbon fiber-reinforced plastic lower deck.
The chassis’ flat underside and angled bumper help it negotiate bumpy surfaces.
White fin spoke wheels are paired with racing semi-slick tires.
This chassis has a seriously low center of gravity!
【Specifications】
Length: 368mm, width: 180mm
Wheelbase: 257mm
Carbon fiber-reinforced plastic bathtub frame
Front midship motor, shaft-driven 4WD
Front & rear oil-filled gear differentials
3-piece steering tie-rod
4-wheel double wishbone suspension
Aluminum cylinder oil dampers (blue caps, touring car size)
Gear ratio = 7.00:1 using kit 26T pinion (14 ratios between 10.71:1 and 6.28:1 are possible with separately sold pinions)
Electronic speed controller (ESC) is sold separately.
【Separately Required Items】
2-channel R/C system w/ESC
Servo motor for steering
R6/AA/UM3 batteries for transmitter
Battery pack & charger
【以下需另購】
2ch 遙控裝置 & ESC電子變速器
轉向用伺服摩打
發訊器用AA電池
遙控車用充電池及充電器
