MACRO HOBBY HK 香港遙控模型

Tamiya 58727 1/10 RC Mitsubishi Pajero (CW-01 Chassis) #0110921

HKD 720.00HKD 600.00會員折扣

數量

已售出： 0

簡介

+ 田宮 58727 1/10 RC遙控車 三菱 Pajero (CW-01底盤) 【Casually, Comfortably, and Anywhere】 This kit is a comical electric radio control car assembly kit of the Pajero, a cross country 4×4 developed by Mitsubishi Motors, which has a long history of making four-wheel drive vehicles, and debuted in 1982. The square, flat-plane styling is modeled with a realistic, impact-resistant plastic body. The sharply finished cabin, bumpers, and front and rear over fenders emphasize the car’s strength. The cargo space at the rear of the vehicle includes a roll bar with spotlight, tool box and spare tire. The Mitsubishi three-diamond emblem and license plate are represented by stickers. Comically reproduced in square form with spotlights, roll bar, spare tire, etc. Front mask with round headlights. The “MITSUBISHI” emblem is represented by sticker. Spotlights attached to the roll bar in the cargo bed enhance the off-road mood. A sunroof is also provided above the cabin. The cargo space at the rear of the cabin includes a tool box and spare tire. The spare tire can be mounted on top of the tool box. Swing axle independent front suspension. The steering system features a servo mounted at an angle and a simple 2-split tie rod. Rolling rigid rear suspension with coil springs and CVA oil damper. Sealed gearbox with integrated differential gears. The white 5-spoke wheels are fitted with 94mm diameter hollow rubber rock-block tires, ideal for cross-country driving. 【The 2WD Chassis at home with wheels in the air or on the ground】 Pull the throttle trigger hard and watch the car enter into a big wheelie! As it does so, the wheelie bar on the back of the rear wheel 2WD chassis supports the vehicle to ensure that it does not flip over completely. The tough ABS plastic CW-01 chassis is made for traversing rough terrain with ease: its suspension features a front independent swing axle and rear rolling rigid setup with coil springs, while the massive 115mm metal-plated wheels are fitted with large tires. The chassis marries toughness with excellent cornering thanks to the in-built differential gear. Finally, with a sealed gearbox to keep out any debris that might enter the model, reliability comes as standard too! 【Specifications】 Length: 385mm, Height: 240mm, Width: 255mm. Wheelbase: 207mm Tread: 195mm (Front/Rear) Tire Width/Diameter: 36/94mm (Front/Rear) ABS Box Type Frame Rear Wheel 2WD Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) F/R CVA Oil Dampers 2-Piece Steering Tie-Rod 3-Bevel Differentials Gear Ratio: 14.7:1 Type 540 Motor Requires an Electronic Speed Controller (sold separately) 【Separately Required Items】 2-channel R/C system w/ESC Servo motor for steering R6/AA/UM3 batteries for transmitter Battery pack & charger 【以下需另購】 2ch 遙控裝置 & ESC電子變速器 轉向用伺服摩打 發訊器用AA電池 遙控車用充電池及充電器

付款、送貨及退貨

+

送貨方式

  • 順豐速運自取服務
  • 香港 本地取貨
  • 實體店自取

付款方式

  • PayMe
  • 銀行轉帳

退貨及退款政策

Welcome to MACRO HOBBY HK 👉官方網站📱: https:/www.macrohobby.store 👉Facebook📱: https://www.facebook.com/Macro-Hobby-HK-105999314285179/ 👉Instagram📱: https://www.instagram.com/macro_hobby_hk/?hl=zh-hkinsta 👉葵興地址🏠:葵興華星工業大廈10樓 👉營業時間⏱:星期一至星期日(1300-2000)如果營業時間有變，將會在Facebook專頁公布，敬請留意 👉付款方式💰:現金，銀行轉賬，另設有轉數快，PayMe(66972989) 另外設有八達通，支付寶和微信支付🚨 👉取貨方式:⚠️只提供自取點自取或者順豐到付 👉 WhatsApp服務範圍如下👇👇👇落單，訂貨，查詢產品價錢，產品存貨狀態P.S. 請勿語音，來電，whatapps來電 ⚠️⚠️⚠️貨物出門恕不退換 如果對貨品有任何問題請即時向店員查詢 🚨🚨請所有顧客細閲MACRO HOBBY換貨政策🚨🚨 ⒈ 訂單一經提交 ，便無法再作出修改，下單前請務必核實所有內容。 ⒉ 所有貨品貨物出門恕不退換，下單時請仔細考慮。 ⒊ 客人如選用順豐速運作為送貨方式，即同意該公司關於快件派送的條款及細則，並承擔貨品有可能因速遞時而損毁的風險。故”完美主義者”建議前往門市取貨。如貨件寄出後收方未有在合理時間內取件或聯絡跟進快件，或者運輸公司無法聯絡上收方，收方將有機會被運輸公司收取存倉費、或快件被放棄、處置或變賣。為確保客人的權益，如訂單發貨後一星期內仍未有收到快件，請儘快主動聯絡我們或運輸公司查詢快件狀況。如因收方長期未取件或運輸公司無法聯絡上收方而導政快件報銷，MACRO HOBBY HK將不對此導致的任何損失或損害承擔責任。 ⒋ 如自取點取貨時發現貨品有品質問題，將作以下安排： ．現場購買或取貨：請於購買或取貨時檢查清楚貨品，如有任何問題，必須即場提出，貨物出門恕不退換 ⚠️⚠️⚠️順豐到付：任何產品一經寄出，不設任何售後/退換服務 🚨請注意，門市即場檢查的所有貨品如果出面任何問題只限更換同款貨品，不設退款。 MACRO HOBBY HK保留一切修訂條款及細則之權利，毋須另行通知。 如有任何爭議，將以MACRO HOBBY HK之決定為最終裁判。

你可能感興趣的商品