MACRO HOBBY HK 香港遙控模型

Tamiya 58746 1/10 RC Peugeot 306 Maxi (BT-01 Chassis) #0111071

Kuantitas
Terjual: 0

Ringkasan

+ 田宮 58746 1/10 RC遙控車 標緻 306 Maxi (BT-01底盤) Here is another R/C kit paired with the 2WD BT-01 chassis which offers choices of FF/MR/FR drive system; this time, a standard wheelbase, front motor / front wheel drive (FF) setup with the body which recreates the Peugeot 306 Maxi. Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. 【Options Galore: the 2WD BT-01 Chassis】 The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear-wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 【千變萬化: 2WD BT-01底盤】 容易上手的2WD BT-01底盤提供兩種不同的軸距，並且可以選擇前驅或後驅式系統，令模型更加接近真車。無需拆除電池﹑摩打和遙控組件即可透過更動終傳齒輪和轉向橋轉換成前輪驅動或後輪驅動，後輪驅動時亦可以再選擇前置(FR)或後置(MR)兩種摩打位置。裝配摩擦式避震器的4輪雙橫臂懸架系統有著前後左右對稱的設計。「摩打座組件」﹑「終傳齒輪組件」﹑「懸架組件」等各部分的組件化設計令組裝更方便，整備性亦得以提升。 Here is the BT-01 chassis, which is a joy to build and work on thanks to its use of various unitized sections. 各部分組件化的構造令組裝和整備更方便的BT-01底盤。 The servo is housed in the right rear, with a long link rod used in the 3-piece setup. 由裝設於車體右後方的伺服摩打伸出長連桿進行控制的3件式轉向系統。 The double-wishbone suspension uses symmetrical arms. 懸架系統是左右對稱的雙橫臂設計。 While coil-sprung dampers are fitted as standard, the BT-01 can be used with separately sold TRF Special Dampers (Hard Black Coating). 標準配備摩擦式避震器。亦可更換成另購的TRF特別避震器(黑色強化塗層)。 The unitized motor mount is affixed to the chassis with 2 screws. 組件化的摩打座部分零件，只需2粒螺絲即可裝脫在底盤上。 Power goes from the midship rear motor to the rear wheels via propeller shaft. 中置摩打透過傳動軸把動力傳到後輪。 The BT-01 uses a plastic 4-bevel differential gear, and is compatible with TT-02 Hop-Up Options such as ball differentials and oil-filled differentials. 差速器是跟TT-02底盤相同的樹脂製4錐齒輪型。可以更換成另購的TT-02用滾珠差速器或注油式差速器。 Here is the rear double-wishbone suspension. As the car corners, rear wheels gain toe-in for better stability. 圖中展示了後輪雙橫臂懸架。轉向時車輪束角會內傾以確保穩定性。 Suspension components are also unitized for smoother pit work. 組件化的懸架系統能發揮優秀整備性。 Flip-up battery holders let you change the battery quickly. 採用掀蓋式電池蓋，令更換電池更加快捷。 A transponder holder is also included – great for races! 設有應答機固定座，令參賽更簡單。 As illustrated here, the BT-01 can be assembled in 3 different setups, each offering 2 wheelbases: 251mm and 257mm. 底盤可選擇組成前輪驅動﹑後輪驅動，後輪驅動時更可以選擇兩種不同的摩打裝設位置。軸距亦有251mm和257mm兩種可供選擇。 【About the Model】 This is a 1/10 scale R/C model assembly kit. Length: 404mm, width: 187mm, height: 155mm. Wheelbase: 257mm (standard). The kit features existing body and new markings. The form of the Peugeot 306 Maxi is authentically recreated in lightweight polycarbonate. 6-spoke wheels are paired with racing radial tires. Separate molded plastic parts recreate side mirrors and rear wing. The product markings are Tamiya originals.

Anda mungkin juga suka