MACRO HOBBY HK 香港遙控模型

YOKOMO 1/10 Super Dog Fighter 2023 Re-release 4WD Offroad Buggy EP Car Kit YZ-870C #0110980

数量
已售出： 0

简介

+ The famous "YZ-870c Super Dogfighter" that dominated the glamorous off-road scene in the 1980s has been faithfully reproduced and reprinted with the original configuration of modern machines, such as FRP chassis, 2-belt drive, and double wishbone suspension. In order to enjoy driving it on circuits, etc., it is equipped with a holder for a short-sized Li-po battery and a gear differential, but the front and rear gearboxes are also made of aluminum castings, and the wheels/tires are reproduced with 1.9 inches, so you can enjoy the atmosphere of the time. The body is of course equipped with a roof duct that reproduces the shape of the time, and the wings are fixed with wires, giving it a nostalgic feel, making it a legendary model that is great to drive and satisfying to display. <Chassis Spec> ■Product packaging: Highly reproduced packaging reminiscent of 1987. ■Main chassis: FRP main chassis can be equipped with thick/thin short LiPo batteries. ■Suspension arms and knuckles: The suspension arms are the same size as the original, and the front and rear common knuckles are reproduced as they are made of aluminum. ■Bulkhead: The aluminum bulkhead is faithfully reproduced from the model at that time. The bulkhead cap and rod end are also reproduced in milky white to reproduce the original form. ■Body, undercowl, and wing: The body, undercowl, and rear wing are also reproduced in the original form. ■Shock tower: The original FRP front and rear shock towers are also reproduced as they were. ■Differential gear and main gear: Front and rear gear differentials and slipper clutches are standard equipment to accommodate current power sources. ■Shock: The shocks, which reproduce the original anodized color, can be set to a wide capacity using the adjustment nut method. ■Tires and wheels: The tire pattern, wheel color, and size are all reproduced with the original dimensions. *The kit does not include a 2-channel radio control set (transmitter, receiver, speed controller, servo), battery (short size Li-po 2 cells), charger, motor, polycarbonate paint, etc. Please purchase separately. *The kit does not include motor, batteries, and other R/C electrics. The YZ-870c has a machine configuration that can be said to be the origin of modern radio-controlled cars, with four-wheel drive, double wishbone suspension, and two-belt drive. It had an overwhelmingly low-profile design for the time, and its high level of stability was a major asset. The front steering block is made of die-cast aluminum. The tie rods and upper arms are attached in a style reminiscent of the time. Natural colored resin parts create a strong impression of the early Super Dogfighter models. The motor mount and lower bulkhead are also made from die-cast aluminum. The wings secured with wire also have a classic style. The 1.9-inch wheels and pin-spike tires, which are a size smaller than the current model, vividly bring back memories of that time. A battery holder that can accommodate short-size LiPo batteries is included. The main chassis also has a battery slot, so you can mount a 3-3 or 4-2 Sub-C battery with a little ingenuity. (The battery holder is only for short Li-po.) The damper has been changed taking into consideration driving performance and ease of maintenance. The suspension pin is secured in place with an E-ring, a nostalgic style. It is equipped with a slipper clutch that also serves to protect the belt so that it can be used with current power sources. A gear differential is also used for the differential, taking into consideration ease of maintenance. The rear stabilizer also enhances stability. Universal shafts that improve driving performance are also standard equipment. YZ-870c超級狗鬥士，一款主宰20世紀80年代迷人越野場景的名車，以其FRP底盤、2皮帶傳動、雙橫臂懸架等配置被忠實再現，可以說是現代機器的起源。為了享受在賽道上等的駕駛樂趣，我們安裝了短尺寸的鋰電池支架並採用了齒輪差速器，但前後齒輪箱也是由鑄鋁製成的，車輪/輪胎以1.9英吋的結構讓您可以享受當時的氛圍。 當然，車身上有再現當時形狀的車頂導管，機翼則用鋼絲固定，充滿懷舊感，使其成為既好駕駛又滿足展示的傳奇車型。 <底盤規格> ■產品包裝：高度可複製的包裝讓人想起 1987 年。 ■主機箱：玻璃鋼主機箱還可配備厚/薄短鋰電池。 ■懸架臂和轉向節：懸架臂與原件尺寸相同，前後通用轉向節採用鋁制，原樣再現。 ■隔板：鋁制隔板忠實地再現了當時的模型。艙壁蓋和桿端也是乳白色的，再現了原來的樣子。 ■車身、下整流罩、機翼： 車身、下整流罩、尾翼也完全再現了原來的形狀。 ■減震塔：原樣的FRP前後減震塔也被原樣再現。 ■差速器/主齒輪：前後齒輪差速器和滑靴離合器是支持當前動力源的標準裝備。 ■減震器：減震器再現了原始的氧化鋁顏色，並使用調節螺母系統以允許寬容量設置。 ■輪胎和車輪：輪胎花紋、車輪顏色和尺寸均按原始尺寸再現。 *套件不包括2通道無線電組（發射器、接收器、調速器、伺服器）電池（短尺寸鋰電池）、充電器、電機、聚碳酸酯塗料等。請單獨購買。 *該套件不包括電機、電池和其他遙控電氣設備。 YZ-870c的機器配置可以說是現代無線電遙控汽車的起源，包括四輪驅動、雙橫臂懸架、兩皮帶驅動。 它的外形設計在當時極為低調，而高度的穩定性是它的一大優勢。 前轉向塊由鋁壓鑄件製成。橫拉桿和上臂的固定方法也再現了當年的風格。 自然色樹脂部件給人以早期《超級狗鬥士》的強烈印象。 電機安裝座和下部主體也由壓鑄鋁製成。 用金屬絲固定的翅膀也是古典風格。 1.9英吋的車輪和比現款小一號的釘釘輪胎，讓人們回憶起那些日子。 配有一個可安裝短尺寸鋰電池的電池座。 主機箱內還有一個電池槽，所以根據你的聰明才智，你還可以安裝3-3或4-2個Sub-C分布式電池。 （電池座僅簡稱Li-po） 考慮到駕駛性能和可維護性，對減震器進行了更改。 吊銷採用懷舊風格，用 E 形環固定。 為了與當前的動力源兼容，它配備了滑靴離合器，同時也起到皮帶保護的作用。 考慮到維護方便，差速器也採用齒輪差速器。 後穩定器也是增加穩定性的一個點。 提高運行性能的萬向軸也是標準配置。

你可能感兴趣的商品